ITAR Registered Manufacturer for Defense and Aerospace Programs
JD Machine is registered with the U.S. Department of State under ITAR and runs export-controlled work inside a CMMC Level 2 and AS9100D system. What registration means, how controlled data is handled, and how to verify it, all on this page.
What ITAR Registration Means
The International Traffic in Arms Regulations (ITAR) control the manufacture, export and brokering of defense articles and defense services on the United States Munitions List. Under 22 CFR Part 122, a U.S. company that manufactures defense articles must register with the U.S. Department of State, Directorate of Defense Trade Controls (DDTC). JD Machine is ITAR registered with the U.S. Department of State.
Some suppliers describe themselves as "ITAR certified," and some RFQs ask for an "ITAR certified" machine shop. DDTC does not issue a certification, so no shop can hold one. ITAR is a registration and compliance regime: registration is the legal status, and compliance is the set of controls a registered manufacturer runs every day so controlled technical data reaches only the people allowed to see it. When a buyer asks for an ITAR certified machine shop, what they need is a registered manufacturer that can show both.
How JD Machine Handles Export-Controlled Work
JD Machine is committed to meeting all design data handling requirements, is ITAR registered and compliant, and holds CMMC Level 2 certification via third-party C3PAO assessment.
U.S. person access
JD Machine performs work under ITAR and CMMC Level 2, which means some positions and work areas carry eligibility requirements tied to U.S. person status. Position descriptions note which roles carry those requirements.
Controlled drawings and data
Drawings and technical data packages on an ITAR program are usually Controlled Unclassified Information as well, so they sit under JD Machine's CMMC Level 2 certified system, assessed by a C3PAO and registered in SPRS. ITAR decides who may see them; CMMC governs how they are protected.
Flowdowns come with the quote request
Send drawings, material callouts and any DFARS, ITAR or CUI handling flowdowns with your quote request. The quote response confirms material, lead time and qualification posture for your program.
Traceability recorded against the program
Material certifications captured at receipt, in-process inspection, first-article reports and final documentation packages are recorded against the program in ERP, so the record an auditor asks for is already on file.
How ITAR Works With CMMC Level 2 and AS9100D
The three credentials answer different questions, and defense programs usually ask all three. ITAR governs who may access defense technical data and where it may go. CMMC Level 2 governs how that data, and any other Controlled Unclassified Information, is protected inside the supplier's environment. AS9100D governs the quality of the part itself. JD Machine holds all three, so a prime contractor qualifying a supplier for an export-controlled program does not find a gap between them.
All CertificationsWhere ITAR Registration Matters
ITAR registration is a prerequisite for work on defense and space programs that involve regulated technical data.
Defense
Components and assemblies for defense programs that carry ITAR scope alongside CMMC Level 2 and DFARS flowdowns.
DefenseAerospace
Military aircraft structures and systems where the drawings themselves are controlled, and AS9102 first article inspection is standard.
AerospaceSpace Exploration
Launch vehicle and spacecraft hardware where export-controlled designs meet tight tolerance and configuration control.
Space ExplorationHow to Verify JD Machine's ITAR Registration
Ask for evidence of the DDTC registration and a summary of how controlled data is protected, then map both against the scope of the work you are awarding. JD Machine sends ITAR registration confirmation and a supplier-security summary on request, together with the AS9100D certificate and CMMC Level 2 record for the same supplier file.
Send the documents you need and the format your procurement system requires through the request form, and the documentation is returned within 24 hours in most cases.
Qualify One Supplier for the Whole Program
Request ITAR, CMMC Level 2 and AS9100D documentation for your supplier file, or send a technical data package for a quote. Response within 24 hours in most cases.
(801) 782-4394ITAR Questions Buyers Ask
Is JD Machine ITAR certified?
JD Machine is ITAR registered with the U.S. Department of State, Directorate of Defense Trade Controls. There is no such thing as ITAR certification: DDTC registers manufacturers and exporters of defense articles, and the registered company is then responsible for complying with the regulations. A supplier that describes itself as "ITAR certified" is using language DDTC has never issued.
What is the difference between ITAR registered and ITAR compliant?
Registration is the legal status under 22 CFR Part 122. Compliance is the operational side: who may access controlled technical data, how drawings and programs are handled, and how exports are controlled. A buyer needs both. JD Machine is ITAR registered and compliant, and sends ITAR registration confirmation and a supplier-security summary on request.
How can I verify JD Machine's ITAR registration?
Request ITAR registration confirmation and a supplier-security summary through the request form. The documentation is returned within 24 hours in most cases.
Does ITAR registration cover cybersecurity requirements?
No. ITAR controls who may access defense technical data and where it may go. Protecting that data inside a supplier's systems is the job of CMMC. JD Machine holds CMMC Level 2 certification through a C3PAO assessment, registered in SPRS, alongside its ITAR registration.